![]() The left-hand side of the measurements shows the real-time temperature of each CPU core, and you can also see the measurements in the taskbar. Just be sure to untick the freeware option during installation.Ĭore Temp provides temperature measurements for every core in your CPU. This is a simpler tool that works with a more basic UI. You can also use the Core Temp tool, one of the best CPU temperature tools for Windows 11 and Windows 10, to monitor the temperatures ( download here). While CAM is intended to be used with NZXT's products, it works really well as a casual monitoring tool in Windows 10 or Windows 11, even if you don't have any NZXT hardware. You can use the software in Guest Mode to avoid creating a user account, and you can also disable the program from starting automatically with Windows if you don't plan on using it often. These are just a few examples of many, but we'll show you how NZXT's CAM and Core Temp work because we have found that these two are the easiest to install and use. CAM is developed by PC case, power supply, and CPU cooler manufacturer NZXT. For more advanced users, or if you're overclocking your CPU and want more in-depth measurements, Intel's eXtreme Tuning Utility (XTU) and AMD's Ryzen Master software are designed by the chipmakers and also offer expansive options. There are multiple programs to choose from, with the best tools for checking CPU temperature, including Core Temp, NZXT's CAM, AIDA64, HWiINFO, or HWMonitor. Last edited by wildmanne39 July 12th, 2016 at 08:09 AM.How to Check Your CPU Temperature in Windows 10 and 11Ĭhecking your CPU temperature is as easy as installing and using monitoring software and then reading the output, and the same techniques apply to Windows 10 and Windows 11. Sudo /etc/init.d/i8kmon restartYou can play with fan speeds and temperatures to get quietness as you wish, but this one is good for me # For computer with 2 fans, use a variant of this instead: # Status check timeout (seconds), override with -timeout option # Report status on stdout, override with -verbose option # Automatic fan control, override with -auto option # Run as daemon, override with -daemon option I've pretty much exhausted all of my know-how and I am at my wits end. So, anyway, I'm throwing this out there in case anyone has some thoughts or ideas. But then why does it work flawlessly under Windows? I would assume there is some hardware issue, or something is heating up. (i.e with the bottom cover on in a warm room) CPU temps are always well below 40c when the fans are running. However, the 39c temp is never reached under -normal- conditions. Also watching the temps with lm-sensors, it seems like when the fans do shut off, it's when the SODIMM temp gets to 39c. However the fans still run for about an hour once they start. The one thing I did try that finally made the fans stop was disabling the nvidia GPU with bbswitch, taking the bottom off the laptop to increase airflow, and opening a window in the room to lower the ambient temperature. I've also tried Arch Linux, Manjaro, Linux Mint, etc. Thinking since it's a newer skylake CPU, I've tried every Ubuntu mainline kernel (4.4, 4.5, 4.6rc1). However, after a few minutes as the laptop warms up, the fans will kick on and continue to run at the slowest speed. When the laptop is cold, and I boot into Ubuntu the fans are off. Under Ubuntu (or any Linux I've tried), once the fans start, they run pretty much forever. When they do come on, they shut off quickly and the temps drop. The fans hardly come on, even under a load. Under Windows 10 the laptop stays nice and cool.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |